Racing / Marine
Gr5 Hex Titanium Disc Brake Bolts for Racing
Grade: Ti6Al4V Class 5
Thread: Precision CNC Rolled
Precision Catalog
Engineered Grade 5 Titanium Hardware Lineup
Machined from premium Grade 5 (Ti6Al4V / TC4) annealed stock down to ±0.005 mm tolerances. Built to withstand high tensile stress, saltwater corrosion, and severe cyclic vibration.
Automotive
Titanium Wheel Bolts M14 DIN Standard Torx Shape CNC Machined
Finish: Nitride Black / Polished
Application: Supercar Hub Assembly
Motorcycle / DIN
M8 M10 M12 Gr5 Titanium Hex Head Racing Motorcycle Bolt
Standard: DIN / GB Standard
Feature: Weight Reduction 44%
Flange System
Gr5 Titanium Alloy Flat Head Hex Flange Bolts M8 Polished Finish
Design: Flat Head Flange
Yield: ≥ 828 MPa
Anodized / PVD
Gr5 Titanium Hexagon Head Flange Bolts M6 M8 M10 PVD/Anodized
Surface: PVD Multicolor / Burnt Blue
Spec: MH-15842 Racing
Wheel Hub
Factory Supply Gr5 Ti6Al4V M14x1.5 Right Hand Thread Wheel Nuts
Thread: M14 × 1.5mm pitch
Core: Lightweight 8mm hole
High Boost Studs
TI Cylinder Head Studs Titanium Head Bolt 12 PT Nut Kit Set
Geometry: 12-Point Aircraft Nut
Standard: M12 / M14 High-Yield
Aero Hardware
Automotive M4 M7 M10 Anodized Gr5 Titanium 12 Point Flange Nut
Standard: DIN / GB MH14515
Tolerance: Micro 0.005 mm
Engineering Grade 5 Ti6Al4V Fasteners for Da Nang's Expanding Industrial Ecosystem
Da Nang stands as Central Vietnam's preeminent socioeconomic core, spearheading high-tech industrialization, advanced marine logistics, and rapid automation growth. As coastal humidity and saline atmospheres combine with intense mechanical demands across the Da Nang High-Tech Park (Hoa Vang), Hoa Khanh Industrial Zone, and the maritime shipyards lining Da Nang Port and Tien Sa Terminal, conventional fastener solutions such as 304 and 316 stainless steel consistently reach their fatigue and pitting corrosion limits.
Ti6Al4V Grade 5 (designated TC4 under GB standards) provides the foundational solution for structural hardware deployed across Da Nang. Possessing a yield strength exceeding 828 MPa and an ultimate tensile rating past 895 MPa, Grade 5 titanium exhibits a specific strength-to-weight ratio nearly double that of austenitic stainless steel and quenched-and-tempered carbon steels. Coupled with an inert rutile (TiO₂) native passive oxide layer that forms instantaneously in oxygenated and chloride-rich marine conditions, Ti6Al4V components are virtually impervious to saltwater spray, stress corrosion cracking (SCC), and pitting attack.
Chloride Immunity for Da Nang Coastal Infrastructure
Unlike 300-series stainless steels that succumb to intergranular chloride-induced corrosion under Central Vietnam's monsoon temperatures, Gr5 forms a self-healing titanium oxide layer that thrives in submerged sea applications, offshore mooring mounts, and harbor crane mechanics.
Mass Reduction in High-Speed Automation
With a nominal density of 4.43 g/cm³ compared to steel's 7.85 g/cm³, incorporating Grade 5 screws and studs into pick-and-place end-effectors, robotics, and linear stages drastically reduces rotational inertia and structural load without compromising structural yield.
Fatigue Life in Marine & Racing Applications
Our fasteners are manufactured using multi-axis CNC turn-milling combined with cold thread-rolling techniques. Cold rolling preserves longitudinal grain orientation around thread roots, yielding superior resistance against cyclic fatigue and vibration loosening.
Mechanical Comparison: Ti6Al4V vs Industrial Alternatives in Da Nang Operations
Procurement teams and mechanical engineers throughout Da Nang often weigh Grade 5 titanium against conventional alloys for new machinery, coastal installations, and high-performance automotive platforms. Below is the quantitative engineering breakdown:
| Alloy Spec / Metric | Density (g/cm³) | Tensile Strength (MPa) | Yield Strength (MPa) | Salt-Fog Resistance (ASTM B117) | Thermal Stability Range |
|---|---|---|---|---|---|
| Ti6Al4V Grade 5 (Annealed Bar) | 4.43 | ≥ 895 | ≥ 828 | Immune (>3,000 hrs unaffected) | -250°C to +400°C |
| 316 Marine Grade Stainless Steel | 8.00 | 580 | 290 | Susceptible to crevice corrosion | Up to +450°C |
| Grade 10.9 Alloy Steel (Zinc Plated) | 7.85 | 1,040 | 940 | Requires plating; pits upon salt exposure | -50°C to +200°C |
| Commercially Pure Ti Grade 2 | 4.51 | 345 | 275 | Immune | Up to +300°C |
Industrial Trends Shaping Fastener Procurement Across Da Nang
Da Nang is undergoing a major structural transformation as outlined in its Master Plan towards 2030, targeting high-tech manufacturing, green maritime shipping, and international logistics. This macroeconomic surge directly drives demand for precision titanium hardware across multiple distinct verticals:
1. Maritime Equipment and Port Infrastructure: Tien Sa and Lien Chieu deep-water ports are modernizing terminal cranes, subsea pipeline linkages, and navigation buoys. Salt mist along Da Nang Bay induces premature oxidation in carbon and low-grade stainless fasteners, causing costly mechanical downtime. Marine engineers are increasingly specifying custom Grade 5 titanium studs, hex flange bolts, and 12-point nuts for critical structural anchors where field replacement is hazardous or cost-prohibitive.
2. High-Tech Electronics and Medical Manufacturing: Da Nang High-Tech Park continues to attract tier-one semiconductor suppliers, cleanroom automated equipment, and surgical assembly firms. Precision titanium CNC turned parts offer non-magnetic characteristics, zero biocompatibility risks, and extreme dimensional stability under cycling thermal loads, making them the preferred fastener standard for precision robotic jigs and diagnostic sensor housings.
3. Performance Powersports & Coastal Marine Crafts: Central Vietnam's bustling tourism and water recreation sectors—spanning luxury yachts, jet skis, and specialized motorsport racing clubs—generate heavy demand for high-strength lightweight fasteners. Upgrading wheel lugs, disc brake assemblies, and cylinder head studs to Grade 5 reduces unsprung mass, optimizes braking response, and prevents unsightly rusty bolt heads caused by ocean breezes.
Factory Advantage: The Direct Baoji Supply Chain Edge
Founded in 2008 directly adjacent to the Baoti Group Industrial Park in Baoji—globally acknowledged as "China's Titanium Valley"—Vunza Titanium Industry Co., Ltd. delivers direct OEM and ODM custom manufacturing without middleman markups. Serving industrial buyers across Southeast Asia and the Da Nang metropolitan hub, our plant bridges raw mineral processing with high-tolerance fabrication.
Complete Material Traceability
Every fastener is traceable back to certified zero-grade sponge titanium. EN 10204 3.1 Mill Test Certificates verify chemical composition and mechanical compliance with ASTM B348 / F136 standards.
34 Multi-Axis CNC Workstations
Our shop floor features 3-, 4-, and 5-axis DMG MORI and Brother CNC centers achieving continuous dimensional tolerances of 0.005 mm on critical thread pitches and thin-walled hollow heads.
Seasoned Master Craftsmen
Over 50% of our precision engineering operators possess more than 13 years of specialized titanium machining experience, mitigating galling, work-hardening, and surface micro-fissuring.
Da Nang Logistics & Fast Sampling
Direct export channels to Da Nang via maritime freight (Hai Phong/Da Nang port calls) or expedited air freight via DAD Airport ensure production turnaround and sample delivery in as fast as 7 days.
Procurement FAQ: Sourcing Custom Titanium Fasteners in Da Nang
Clear, straightforward answers addressing the most common technical, customs, and quality control inquiries from engineers and purchasing officers in Da Nang:
Why choose Ti6Al4V Grade 5 over standard SUS316 for Da Nang maritime machinery?
While SUS316 provides basic rust protection, it frequently suffers from crevice corrosion, pitting, and chloride stress cracking in tropical marine zones like Da Nang when sea temperatures rise. Grade 5 titanium is virtually 100% immune to ambient seawater attack, possesses three times the yield strength (828 MPa vs 290 MPa), and cuts mechanical component mass by approximately 44%, vastly extending maintenance-free operating cycles.
Can custom fasteners be fabricated strictly according to Vietnamese or international drawings?
Yes. We routinely manufacture parts directly from CAD files (STEP, IGES, DXF) and engineering 2D PDF prints following DIN, ISO, GB, ASME, or proprietary internal drawing standards. Custom specifications include modified thread leads, safety wire head drilling, internal Torx recesses, rolled threads, and custom flange diameters.
What surface finishes are offered to prevent thread galling during assembly?
Titanium alloys are naturally susceptible to galling under high-torque dry assembly. To prevent this, we provide PVD nitride coatings (nitride black, gold, burnt blue), type II anodization, micro-polishing, and molybdenum disulfide dry-film lubrication coatings. In addition, we advise applying high-pressure anti-seize paste during field installations.
What are the typical lead times and customs logistics procedures for Da Nang shipments?
Standard stock components dispatch within 48 hours. Custom CNC prototype batches typically require 7 to 12 working days, with mass production runs completing in 15 to 25 days. Shipments are handled via express courier (DHL, FedEx, UPS) directly to Da Nang factories within 3–5 transit days, or via LCL/FCL ocean freight to Da Nang Port accompanied by full Form E Certificate of Origin documentation for preferential import duties.
How does the factory verify material authenticity and dimensional accuracy?
Every production heat starts with spectral raw material analysis. During machining, critical features are inspected via first-article inspection (FAI) protocols, 3D coordinate measuring machines (CMM), optical profile projectors, and pitch thread micrometers. Certified EN 10204 3.1 Mill Test Certificates and comprehensive dimensional inspection reports are systematically supplied with your shipment.
Connect Directly with Our Senior Titanium Machining Engineers
Seeking custom Grade 5 titanium bolts, studs, wheel nuts, or CNC marine parts for Da Nang projects? Send your CAD drawings, required thread specs, and target volumes today for an expedited DFM evaluation and transparent factory quote.
Inquire Now